// Copyright 2023 Bradley D. Nelson // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. /* * ESP32forth Oled v{{VERSION}} * Revision: {{REVISION}} */ // You will need to install these libraries from the Library Manager: // Adafruit SSD1306 // Adafruit GFX Library // Adafruit BusIO #include #include static Adafruit_SSD1306 *oled_display = 0; #define OPTIONAL_OLED_VOCABULARY V(oled) #define OPTIONAL_OLED_SUPPORT \ XV(internals, "oled-source", OLED_SOURCE, \ PUSH oled_source; PUSH sizeof(oled_source) - 1) \ YV(oled, OledAddr, PUSH &oled_display) \ YV(oled, OledNew, oled_display = new Adafruit_SSD1306(n2, n1, &Wire, n0); DROPn(3)) \ YV(oled, OledDelete, delete oled_display) \ YV(oled, OledBegin, n0 = oled_display->begin(n1, n0); NIP) \ YV(oled, OledHOME, oled_display->setCursor(0,0); DROP) \ YV(oled, OledCLS, oled_display->clearDisplay()) \ YV(oled, OledTextc, oled_display->setTextColor(n0); DROP) \ YV(oled, OledPrintln, oled_display->println(c0); DROP) \ YV(oled, OledNumln, oled_display->println(n0); DROP) \ YV(oled, OledNum, oled_display->print(n0); DROP) \ YV(oled, OledDisplay, oled_display->display()) \ YV(oled, OledPrint, oled_display->write(c0); DROP) \ YV(oled, OledInvert, oled_display->invertDisplay(n0); DROP) \ YV(oled, OledTextsize, oled_display->setTextSize(n0); DROP) \ YV(oled, OledSetCursor, oled_display->setCursor(n1,n0); DROPn(2)) \ YV(oled, OledPixel, oled_display->drawPixel(n2, n1, n0); DROPn(2)) \ YV(oled, OledDrawL, oled_display->drawLine(n4, n3, n2, n1, n0); DROPn(4)) \ YV(oled, OledCirc, oled_display->drawCircle(n3,n2, n1, n0); DROPn(3)) \ YV(oled, OledCircF, oled_display->fillCircle(n3, n2, n1, n0); DROPn(3)) \ YV(oled, OledRect, oled_display->drawRect(n4, n3, n2, n1, n0); DROPn(4)) \ YV(oled, OledRectF, oled_display->fillRect(n4, n3, n2, n1, n0); DROPn(3)) \ YV(oled, OledRectR, oled_display->drawRoundRect(n5, n4, n3, n2, n1, n0); DROPn(5)) \ YV(oled, OledRectRF, oled_display->fillRoundRect(n5, n4, n3, n2, n1, n0 ); DROPn(5)) #include "gen/esp32_oled.h"