Add Serial/Serial2 begin3 and writeChar

esp32/builtins.h

@@ -175,10 +175,12 @@ static cell_t ResizeFile(cell_t fd, cell_t size);
 
 #define REQUIRED_SERIAL_SUPPORT \
   XV(serial, "Serial.begin", SERIAL_BEGIN, Serial.begin(tos); DROP) \
+  XV(serial, "Serial.begin3", SERIAL_BEGIN3, Serial.begin(n2, SERIAL_8N1, n1, n0); DROPn(3)) \
   XV(serial, "Serial.end", SERIAL_END, Serial.end()) \
   XV(serial, "Serial.available", SERIAL_AVAILABLE, PUSH Serial.available()) \
   XV(serial, "Serial.readBytes", SERIAL_READ_BYTES, n0 = Serial.readBytes(b1, n0); NIP) \
   XV(serial, "Serial.write", SERIAL_WRITE, n0 = Serial.write(b1, n0); NIP) \
+  XV(serial, "Serial.writeChar", SERIAL_WRITECHAR, n0 = Serial.write(n0)) \
   XV(serial, "Serial.flush", SERIAL_FLUSH, Serial.flush()) \
   XV(serial, "Serial.setDebugOutput", SERIAL_DEBUG_OUTPUT, Serial.setDebugOutput(n0); DROP)
 
@@ -187,10 +189,12 @@ static cell_t ResizeFile(cell_t fd, cell_t size);
 #else
 # define OPTIONAL_SERIAL2_SUPPORT \
   XV(serial, "Serial2.begin", SERIAL2_BEGIN, Serial2.begin(tos); DROP) \
+  XV(serial, "Serial2.begin3", SERIAL2_BEGIN3, Serial2.begin(n2, SERIAL_8N1, n1, n0); DROPn(3)) \
   XV(serial, "Serial2.end", SERIAL2_END, Serial2.end()) \
   XV(serial, "Serial2.available", SERIAL2_AVAILABLE, PUSH Serial2.available()) \
   XV(serial, "Serial2.readBytes", SERIAL2_READ_BYTES, n0 = Serial2.readBytes(b1, n0); NIP) \
   XV(serial, "Serial2.write", SERIAL2_WRITE, n0 = Serial2.write(b1, n0); NIP) \
+  XV(serial, "Serial2.writeChar", SERIAL2_WRITECHAR, n0 = Serial2.write(n0)) \
   XV(serial, "Serial2.flush", SERIAL2_FLUSH, Serial2.flush()) \
   XV(serial, "Serial2.setDebugOutput", SERIAL2_DEBUG_OUTPUT, Serial2.setDebugOutput(n0); DROP)
 #endif

esp32/platform.fs

@@ -40,12 +40,28 @@ also ledc also serial also SPIFFS
 ( Map Arduino / ESP32 things to shorter names. )
 : pin ( n pin# -- ) swap digitalWrite ;
 : adc ( n -- n ) analogRead ;
+: duty ( n n -- ) 255 min 8191 255 */ ledcWrite ;
+: freq ( n n -- ) 1000 * 13 ledcAttach drop ;
+: tone ( n n -- ) 1000 * ledcWriteTone drop ;
 
 ( Basic Ardiuno Constants )
 0 constant LOW
 1 constant HIGH
+
 1 constant INPUT
-2 constant OUTPUT
+\ 2 constant OUTPUT
+\ // Changed OUTPUT from 0x02 to behave the same as Arduino pinMode(pin,OUTPUT)
+\ // where you can read the state of pin even when it is set as OUTPUT
+3 constant OUTPUT
+4 constant PULLUP
+5 constant INPUT_PULLUP
+8 constant PULLDOWN
+9 constant INPUT_PULLDOWN
+16 constant OPEN_DRAIN
+18 constant OUTPUT_OPEN_DRAIN
+192 constant ANALOG
+
+
 2 constant LED
 
 ( Startup Setup )

site/ESP32forth.html

@@ -352,10 +352,12 @@ REALLOC ( a n -- a | 0 )   System realloc
 These words are inside the <code>Serial</code> vocabulary.
 <pre>
 Serial.begin ( baud -- )   Start serial port
+Serial.begin3 ( baud rxPin txPin -- )   Start serial port
 Serial.end ( -- )   End serial port
 Serial.available ( -- f )   Is serial data available
 Serial.readBytes ( a n -- n )   Read serial bytes, return number gotten
 Serial.write ( a n -- n )   Write serial bytes
+Serial.writeChar ( c -- n )   Write serial character
 Serial.flush ( -- )   Flush serial buffer
 </pre>
 
@@ -500,6 +502,7 @@ SPIFFS.end ( -- )
 SPIFFS.format ( -- f )
 SPIFFS.totalBytes ( -- n )
 SPIFFS.usedBytes ( -- n )
+SPIFFS.exists ( z -- f )   Test if file exists for path (omitting "/spiffs") like z" /blocks.fb"
 </pre>
 
 <h5>WebServer (DEPRECATED)</h5>
@@ -1231,4 +1234,3 @@ New variables can be declared in each word and are scoped to that word.
   Y(MY_WORD, cell_t foo = n0; DROP; char *x = c0; DROP; \
              PUSH my_func(foo, x)) \
 </pre>
-